TVR Service Schedule

TVR homepage  TVR Pictures  TVR Costs  TVR Specifications


Model  
Owners Name   
Registration No.  
VIN  
Engine No.  
Mileage  
Months
  -   12   24   36   48   60   72   84   96   108
Mileage x 1000
1 6 12 18 24 30 36 42 48 54
Carry out Preliminary Road Test - see Notes
Check Seat belts Operation & Mountings
Check Operation of all Electrical Components
(inc Alarm & A/Con)
Remove all Road Wheels and Apply Anti-seize 
Compound to Hubs + Wheel Studs
Check Handbrake Operation and Lever Security.  
Adjust and Lubricate if Required
Inspect Brake Pads for Wear, Calipers for Leaks, Discs for Condition, Flexible Hoses Condition
Remove Front + Rear Pads + Check for Deterioration
Change Brake Fluid
Check Fuel, Clutch, Brakes Pipes + Unions for Chafing, Corrosion + Correct Routing
Remove Exhaust, Lubricate Prop + Check bolts are secure
Check Diff Mounting Bolts
Change Fuel Filter
Change Gearbox Oil
Change Engine Oil + filter
Check Exhaust System Condition
Check/Top up Gearbox Oil
Check/Top up Diff Oil
Change Diff Oil
Check Condition of Steering Joints, Rack Gaiters, Ball Joints and Wishbones Bushes
Check for Fluid Leaks from Hydraulic Pipes and Unions (PAS only)
Check tyres for correct Spec. and Damage,
Road Wheels for damage, Refit to original position
Check all Suspension Fixings for Security
Visually check complete underside of Vehicle for Faults/Abnormalities
Check Security of ex manifold Bolts (Rover Engines Only)
Check Security of Rocker Covers (Rover engines Only)
Change Spark Plugs
Check Distributor Cap, Ignition Leads and Low Tension Wires for Deterioration
Check Crank Sensor for Debris (Cerbera Only)
Check Engine Sensor Connections for Corrosion (Cerbera Only)
Check Drive Belts Condition, Adjust/Change if Required
Check Air cleaner Element (Cerbera every Service)
Change Air Filter Element
Check Adjust Tappets and Timing Chain Tension 
(Cerbera Only)
Check the Condition of the Engine + Gearbox Mounting Rubbers
Check throttles and linkage operation and lubricate where possible
Check/Adjust Throttle Stop
Check/Top Up PAS fluid (where applicable)
Check Top Up Clutch Fluid
Change Clutch fluid
Check/Top Up Brake fluid
Check Top Up Windscreen Washers and Check Wiper Blade Condition
Check Master Cylinder and Under Bonnet Grommets Sealed
Reseal if Required
Check engine Breather/Hoses for Security  and Condition
Change Coolant - see Note 2
Check/Adjust Ignition timing and Co. with Engine at operating Temperature (Griffith & Chimaera)
Check/Adjust Engine setting on Computer with Engine at Operating Temperature (Cerbera)
Check Cooling System for Leaks, Hoses for Security
Check Cooling fans Operation
Check/Adjust Tyre Pressures (INC Spare)
Check Headlight Alignment and Auxiliary Lights if Fitted
Check/Adjust Tracking Front + Rear
Check/Adjust Cambers Front + Rear
Check/Adjust/Lubricate all Hinges, Doors, Boot and Bonnet Locks/Catches
Road Test the Vehicle
Centralise the Steering Wheel (if Necessary)
Wash Vehicle and Stamp Service Book

Additional Work, Recommendations & Notes

1.  Preliminary road test to assess:  Brakes, Clutch, Steering, Engine Performance, Handling and Windnoise

2.  Change Coolant every 2 Years

 

Technician's name:

Signature:

 

TVR homepage TVR pictures TVR costs TVR Specifications
Top